This page outlines tasks that many people feel they need the VPN client to use. We intend to fill this page with helpful tips, so please send mail to CELS Systems if you have a question that’s not addressed here — you may be surprised to learn that you don’t need the VPN for something that previously required it. Also, the lab is trying to find ways to allow people access to internal data without having to use separate VPN software.
If you’re on-site, you can connect to the Argonne-auth networks using your Argonne credentials. This serves functionally the same as a VPN or wired connection, but requires no approval or special resource access.
Argonne supports encrypted mail reading and sending. See configuring your e-mail client.
Argonne has set up a portal at dash.anl.gov to provide access to many business systems. Choose the “Light version” and you won’t need to install any additional software.
Open a SOCKS proxy connection with the following command in GCE, using instructions from here:
ssh -D 32000 homes-gce
Then configure your web client to use SOCKS proxy on localhost using the port number you used above (32000 in this example).
You can find extensions for Chrome and Firefox to quickly switch between these configurations.
Please note that as long as you have your SOCKS proxy on, *all* your web traffic is routed to the host through which you connected (login.mcs.anl.gov in the example above).
This is useful for reading journals that require your connection originate at Argonne.
Browsers and configuration:
- Firefox: Use Proxy Switcher. Sample config (assuming the port number chosen is 31000)
- Switch to “Direct” when you are not proxying, switch to “Manual” when you are.
- Chrome: Use Proxy SwitchyOmega. Sample config (assuming the port number chosen is 32000)
- Switch to “Direct” when you are not proxying, switch to “ANL” or whatever you named the profile when you are.
If you’re using a Mac or Linux machine, simply do the following on a commandline:
ssh -L 3389:windows.cels.anl.gov:3389 homes-gce
Then connect to “localhost” with your rdesktop client. When you’re done, you can close the SSH connection. The above instructions presume you’ve set up your SSH as documented here.
Box is accessible from anywhere without a VPN.
See Printing for more details.